Hills FD12001 Manual de Utilização e Manutenção

PortableTM Indoor Outdoor Clothesline Owner’s ManualTO SUIT MODELS:PortableTM 170 PortableTM 120

10Folding and UnfoldingFolding and UnfoldingA. To fold away your Portable Clothesline, pull the latch out with one hand, while supporting and r

11AccessoriesHanging bracketTo hang your Portable Clothesline for convenient storage a hanging bracket has been included.1. The hanging bracket can be

12AccessoriesWind tetherWhen you use your Portable Clothesline outdoors (particularly on balconies) we recommend using the wind tether. Secure the clo

13Hills Smart PegsWe have included a ten pack of Hills Smart PegsTM for use with your Portable Clothesline.Hills Smart PegsTMareUVresistantandcan

14Care and MaintenanceIt is a good idea to occasionally inspect all components and check for wear and tear or damage. If there is any damage, parts

15Hills GuaranteeHills Industries Limited undertakes that if any part of its manufacture has failed to operate correctly due to faulty workmanship or

Hills Industries Limited A.B.N.35007573417Issue February 2009 PD1711d

2CongratulationsCongratulations on the purchase of your Portable Clothesline, which will bring you many years of trouble free and efficient drying, bot

3AssemblyThe Hills Portable Clothesline is quick and easy to assemble. Just follow the steps below which are suitable for both the 170 (10 line) and

4Assembly2. Attach the Legs to the Hinge Assemblies. Fasten the legs as shown in Steps 1–4.Step 1Locate the locking wedge (with M6 nut assembled) on

53. Attach the Brace to the Legs. Using the eight (8) M6 x 16 countersunk screws, attach the leg brace to the four (4) threaded inserts in the legs u

6Assembly5. Attach the arms. Locate the arms into the recess in each end of the hinge assemblies ensuring the screw holes and insert fasteners align.

76. Attach the line.A. Fasten the line to the innermost line tensioner as shown in steps 1–4.B. Feed the line through the line sleeves as shown in ste

8AssemblyC. Continue to thread the line through each of the line sleeves ensuring all lines are parallel, as shown in step 6. D. Tie off line to th

9Assembly and Line TensioningG. Fit the cover caps and trim the line as shown in steps 7 and 8.Step 7Feed end of the line through each cover cap and fi